From Reactive to Proactive: Understanding FMEA
Tools like Root Cause Analysis and The 5 Whys are essential for understanding why an adverse event happened — but they are, by nature, retrospective. FMEA works differently. Rather than investigating a failure after the fact, it invites your team to walk through a process step by step and ask, “What could go wrong here, and what would happen if it did?” The result is a prioritized picture of risk that exists in your workflows right now, before any patient is harmed.
The tool is built around a simple but powerful scoring framework. For each potential failure mode, the team rates severity, likelihood of occurrence, and detectability — each on a scale of 1 to 10. Multiplying those three scores yields a Risk Priority Number, or RPN, that objectively surfaces which failures demand the most urgent attention. For high-risk clinical processes, this structured method transforms teams from firefighters into architects of safer, more resilient systems.
Resources
The resources below will guide you through the core concepts and practical application of FMEA in a clinical setting. Begin with the introductory video to build a working understanding of the method, then use the reference graphics to support your team as you put it into practice.
Identifying and Prioritizing Risk with FMEA
Preventing Failures Before They Happen with FMEA
In this video, Barbara Paulison, Pharm.D., Clinical Pharmacy Specialist in Medication Safety at UF Health, walks through FMEA from the ground up. Using a high-alert medication administration scenario, she demonstrates how to map a clinical process, identify potential failure modes at each step, and calculate an RPN.
Transcript: Preventing Failures Before They Happen with FMEA
Hi, I’m Barbara Paulison, a Clinical Pharmacy Specialist focusing in Medication Safety at UF Health. Clinical team members are experts at solving problems. But what if you could prevent problems from happening in the first place? Instead of just firefighting, what if you could fireproof your processes?
This is the power of FMEA: Failure Mode and Effects Analysis. While tools like Root Cause Analysis and the 5 Whys help you understand why a problem already happened, FMEA is a proactive tool that helps your team figure out where a process could fail in the future, and what you can do to stop it.
Let’s take a common clinical process: the preparation and administration of a high-alert medication. We start by mapping out each step — from the original order, through pharmacy verification, to dispensing, and finally bedside administration.
Now, for each step, the team asks: “What could go wrong here?” This is the “Failure Mode.”
Let’s focus on one step: The nurse retrieves the medication from the automated dispensing cabinet. A potential failure mode could be: A look-alike, sound-alike medication is selected in error.
Next, we analyze the risk of this failure by scoring it on a scale of 1 to 10 across three categories.
The first category is severity: How serious would the consequence be? Administering the wrong high-alert medication can be catastrophic for the patient. We’ll score it a 9.
Second, Occurrence: How likely is this failure to happen? With hundreds of cabinet transactions per shift and medications stored in close proximity, it happens more than we’d like. Let’s give it a 6.
Third, Detection: How easy would it be to catch this error before it reaches the patient? Without a barcode scan at the bedside, an incorrect selection can be very difficult to catch. We’ll score it a 7.
Finally, we multiply these numbers to get a Risk Priority Number, or RPN. Here, it’s 378.
Your team does this for every potential failure in the process. The failures with the highest RPNs are your biggest risks and your top priorities for action.
For our example, the high RPN signals that the cabinet retrieval step is a major vulnerability. The team might decide to implement barcode medication verification or reorganize cabinet storage to physically separate look-alike medications.
This same approach applies to some of healthcare’s highest-risk processes — like blood transfusions and surgical procedures — where the consequences of an undetected failure are severe and the case for proactive risk assessment is strongest.
FMEA transforms your team from being reactive problem-solvers to being proactive architects of safer systems. It gives you a structured way to anticipate challenges and build more resilient processes, ensuring the best possible care for your patients.
Applying FMEA with Your Team
FMEA: A 5-Step Guide to Proactive Risk Assessment
This reference guide distills the FMEA process into a clear, actionable framework. It walks teams through all five steps — from mapping the clinical workflow and brainstorming failure modes, to scoring each failure across severity, occurrence, and detection, calculating the RPN, and prioritizing action.
Download FMEA: A 5-Step Guide to Proactive Risk Assessment
Also included:
- Scoring cheat sheet for quick reference
- Two annotated clinical examples: a medication labeling hazard and an infusion pump battery failure
- Practical team tips to support collaboration
RCA vs. FMEA (Two-Column Comparison Table)
| RCA | FMEA |
|---|---|
Retrospective |
Prospective |
“What happened?” |
“What could happen?” |
Event-driven |
Process-driven |
Looks backward at an adverse event. |
Looks forward at a high-risk process. |

